Replica Edge Connector Clamp Cards - GOLD plated, Silver Solder Available. Shipping Included.

These cards are designed to fit vintage and replica graflex clamps. These are all 2" long x 0.625" wide x 0.063" thick.Not all clamps are created equal. Some sanding may be required if your card fits too tightly.

Ask about bulk orders of 100 or more for your saber runs. Bulk orders get the name of your company/title of your run on the edge of the card

Please allow up to ten to fifteen working days to get your order shipped. I solder these by hand, and have experienced an unprecedented amount of orders for these. Thank you for your patience! Order below: BOLD indicates most screen accurate version


ROTJV2/ESB Clamp Cards
ROTJV2 on one side, ESB on the other

Plain - Gold plated, no silver solder: $20
Silver solder thin traces on ESB side: $25
Silver solder thin traces on ROTJV2 side: $30
Silver solder thin traces on both sides: $35

Choose Silver Solder Option:

ESBA/ESBB Clamp Cards
Thick traces on one side, Thin traces on the other

Plain - Gold plated, no silver solder: $20
Silver Solder on ESB Side A: $25
Silver Solder on ESB Side B: $25

Silver Solder on both sides: $35

Choose Silver Solder Option:


ROTSA/ROTSO Clamp Cards: $25
ROTS Anakin on one side, ROTS Obi on the other
Gold plated & black soldermask on both sides


ROTJ Hero & Stunt Clamp Cards: $20
ROTJ Hero on one side, ROTJ Stunt on the other
Bare copper & matte black soldermask on both sides


TFA Left Trace One-sided Clamp Card
Gold plated traces, opposite side is blank

Plain - Gold plated, no silver solder: $15
Silver Solder Thin Traces: $20

Choose silver solder option:


TFA Translucent Left Trace One-sided Clamp Card
Translucent PCB, Gold plated traces, opposite side is blank

Plain - Gold plated, no silver solder: $15
Silver Solder Thin Traces: $25

Choose silver solder option:





This site and my works have been featured by the kind folks below. Thank you so much from the bottom of the slothfurnace!

ANH Obi Epic Reveal was the grand prize winner of the 2012 Instructables/Thinkgeek Sci-Fi contest

MSNBC Today - c|net feature and gallery - SWTORStrategies.com - 8BitDad

Notcot.org - GeekTyrant - The Escapist on the ROTJ Luke - WIRED - Geekologie - Gizmodo - The Daily What

MAKE Magazine: ROTJ Luke - Hack a Day: ROTJ Luke - Slothfurnace on Reddit - Slothfurnace gets Slashdotted

The Escapist on the ANH Luke - Neatorama - io9 - ANH Obi on MAKE Magazine's blog - Hack a Day: ANH Obi

BioWare's The Old Republic lightsaber assembly ( I made the pieces in the cinematic to match my ANH Graflex internals.)



Your friendly neighborhood Slothfurnace is none other than Bradley W. Lewis. I am a videogame developer by day, and a robotpirate by night. You can contact me at bradley at slothfurnace dot com if you like. I also have some twitter and facebook links up in this piece.

This site is part of the nonentity network. Not associated with Hasbro, Master Replicas, LUCASFILM LTD. or any LFL Ltd. Film or Franchise.